Cookie preferences
EN144-1 VALVE AXIS KIT
Axis kit for EN 144-1 valve spare part made of chrome plated brass. It includes Teflon and rubber seal. Overall length: 35 mm
O-RING EXTRACTORS
Brass O-rings extractors for the O-Ring extraction and replacement in regulators, housings, lights ... etc. The brass head prevents damage to the O-Ring body when removed, in case wold be necessary reuse it. The kit includes three extractors with different types of heads, and a set for lubrication that includes two brushes whit different tip and small silicone grease tube.
Description:
Brass O-rings extractors for the O-Ring extraction and replacement in regulators, housings, lights ... etc. The brass head prevents damage to the O-Ring body when removed, in case wold be necessary reuse it.
The kit includes three extractors with different types of heads, and a set for lubrication that includes two brushes whit different tip and small silicone grease tube
SBRGACDT05
Data sheet
- SPARES & ACCESSORIES
- MAINTENANCE
Specific References
Brass O-rings extractors for the O-Ring extraction and replacement in regulators, housings, lights ... etc. The brass head prevents damage to the O-Ring body when removed, in case wold be necessary reuse it. The kit includes three extractors with different types of heads, and a set for lubrication that includes two brushes whit different tip and small silicone grease tube.
16 other products in the same category:
FLEX OCTOPUS HOSE 100 CM
Low pressure hose for octopus with braid outer coating. Yellow color. Length 100 cm.
MISTRAL POSITIVE LENS (Left)
Left lens for the Subacqua Mistral mask with a customizable corrective lens across the lower portion.
CLOSING CLIP FOR DISCOVER CASE
Closing-hinge clip for Discover cases. Is valid for double lid and simple lid models. Replaces clips that have been broken by everyday use. They are sold by units
MARKER SHAFT STEEL
35 cm stainless steel shaft, very practical to mark objects or animals while diving. Incorporates a carabiner with a ring, all in stainless steel, easily attached to the BCD. Can be used as a support point for divers. Can also be used as a tank banger for underwater communication if necessary.
DIN200/INT YOKE CONVERSOR
Converting piece that screws on regulators with DIN 200 system, and converts into INT system. Very practical for trips where the taps of the bottles have INT system.
HP HEAVY DUTY HOSE 80 CM
High pressure hose for pressure gauge or console: Diameter: 12 mm. Length: 80 cm
VALVE REPAIR KIT TEPHON + AXE
Valve repair kit that includes the following elements: Flat Teflon valve in chromed brass. Overall length: 18 mm; Thread diameter 11.5 mm, Axe in chromed brass faucet. Overall length: 34.5 mm, Axe tephon and rubber joints, Outer knob tephon ring. External diameter: 18 mm
CYLINDER PROTECTOR NET
Protector net for all kinds of bottles. High resistance. Protects of blows and bites painting where later may be appear rust spots in the bottle.
NO FOG SPRAY
subacqua no fog spray: No fogging liquid spray to apply on the inside crystals masks and prevent fogging. 30 ml container with spray applicator, easy to use and which in turn saves doses.
DIN VALVE PROTECTOR W/PURGE
Chrome Brass protective cap with integrated purge valves DIN 300. Protects the threads and prevents leakage of gas bottle an unintentional openings, such as when transported in the trunk of the car.
ZIP PARAFINE 30GR
Neutral paraffin stick for maintaining metal zippers, preventing clogging and facilitating their movement. Essential for the daily care of dry suits
BC HOSE 90 CM
Low pressure hose to inflate your jacket. Standard valve connection to BPI and LP 3/8 thread for connection to the first stage.
TANK STRAP FOR BC 125 CM
Nylon strap with plastic buckle to hold the bottle to BC. Have a velcro strap to attach the remaining end to the adjusted strap and keep it from opening. Length: 125 cm