Cookie preferences
TANK BOOT 5/7 L
Rubber boot for bottles of 5 and 7 liters. Keeps the bottle in standing upright, while avoiding scratches and knocks.
3/8 TO 1/2 FEMALE CONVERTER
Converting part to adapt high flow hoses with 1/2 thread to standard low pressure ports of the first stage regulator with 3/8 thread.
Description:
Converting part to adapt high flow hoses with 1/2 thread to standard low pressure ports of the first stage regulator with 3/8 thread.
Converting part to adapt high flow hoses with 1/2 thread to standard low pressure ports of the first stage regulator with 3/8 thread.
SBRC0010
Data sheet
- SPARES & ACCESSORIES
- SPARES & ACCESSORIES FOR REGULATORS
Specific References
Converting part to adapt high flow hoses with 1/2 thread to standard low pressure ports of the first stage regulator with 3/8 thread.
16 other products in the same category:
O-RINGS FOR DIN REGULATORS (20 Units)
Spare O-Rings for the most first stages regulators with DIN system (some models could use another o-ring size). Sold in 20 units set
BUOY WEIGHT 0.3 KG
Deco buoys weight to 0.3 kg. It lets wrap the rope on it and not deploy it to tangle easily occur.
VALVE REPAIR KIT TEPHON + AXE
Valve repair kit that includes the following elements: Flat Teflon valve in chromed brass. Overall length: 18 mm; Thread diameter 11.5 mm, Axe in chromed brass faucet. Overall length: 34.5 mm, Axe tephon and rubber joints, Outer knob tephon ring. External diameter: 18 mm
VALVE KNOB LONG
Knob for the valve made in black rubber, with a length greater than the usual knobs for easy opening and closing.
O-RINGS FOR LP 3/8 HOSE/PORT (20 Units)
Spare LP O-Rings for 3/8 threads, hoses and ports. Sold in 20 units set
MISTRAL POSITIVE LENS (Right)
Left lens for the Subacqua Mistral mask with a customizable corrective lens across the lower portion.
O-RINGS FOR HP 7/16 HOSE/PORT (20 Units)
Spare HP O-Rings for 7/16 threads, hoses and ports. Sold in 20 units set
ICE CONVERSION KIT FOR TIFON REGULATOR
Kit cold/contaminated waters for Subaqua Tifon regulator. Converts a high-quality regulator, as is the typhoon, in one of supreme quality by adding the second membrane that makes the first stage completely sealed and valid for diving under the ice and even in contaminated water.
ALPHA 30 X 20 FLAG
Dimensions: 30 cm x 20 cm. Tape double-stitched reinforcement in the back. Nylon sling attachment to mast or halyard.
NEOPRENE WRIST SEAL FOR DRYSUIT
Neoprene wrist seal for neoprene drysuits spares or repairs. Is original part in Subacqua´s Back Dry dryssuits models.
HEAVY DUTY HANGER
Extra robust hanger to hang wetsuits, BC and other equipment components, without fear of them to break by the weight. Available in three colors: Yellow, Black and Blue.
SLATE W/CLIP
Practice underwater slate that lets you write under water; for maps, directions, decompression tables, checklist ... etc or contact with the partner.
BAUDRIER WEIGHT SYSTEM 7 KG
Baudrier weight system harness, consisting of three weighted pieces for a total weight of 7 kg.This kind of weight system, commonly used in professional and commercial diving, is ideal for all divers who need a large amount of weight, especially if diving with dry suit, because it allows for weight distribution along the shoulders and it is much more convenient than carrying a lot of weight at the waist.It includes reinforced nylon straps with plastic buckles, which form a fully adjustable harness.Three weights in a triangular back formation and two on the side.
TANK STRAP FOR BC
Nylon strap with plastic buckle to hold the bottle to BC. Have a velcro strap to attach the remaining end to the adjusted strap and keep it from opening