Cookie preferences
DIN 300 TO INT. TANK ADAPTER
Converssion piece from DIN 300 bar, to a INT system. This problem usually happens in surface breathing apparatus tanks.
BC HOSE 90 CM
Low pressure hose to inflate your jacket. Standard valve connection to BPI and LP 3/8 thread for connection to the first stage.
Description:
Low pressure hose to inflate your jacket. Standard valve connection to BPI and LP 3/8 thread for connection to the first stage.
SBLATLPINT900
Data sheet
- SPARES & ACCESSORIES
- SPARES & ACCESSORIES FOR BCD
Specific References
Low pressure hose to inflate your jacket. Standard valve connection to BPI and LP 3/8 thread for connection to the first stage.
16 other products in the same category:
ALPHA 30 X 20 FLAG
Dimensions: 30 cm x 20 cm. Tape double-stitched reinforcement in the back. Nylon sling attachment to mast or halyard.
TANK BOOT FOR 2X10 L TWIN
Tank rubber boot for 2x10 liters twins. Keeps the bottle in standing upright, while avoiding scratches and knocks.
O-RINGS FOR LP 3/8 HOSE/PORT (20 Units)
Spare LP O-Rings for 3/8 threads, hoses and ports. Sold in 20 units set
2nd STAGE 360° SWIVEL
Second stage swivel regulator. It is connected between the hose and the second stage, and gives freedom to turn the hose. Prevents pulling the mout
O-RINGS FOR PRESSURE GAUGE AXE (20 Units)
Spare HP O-Rings for pressure gauge internal axe piece. Sold in 20 units set
MISTRAL POSITIVE LENS (Left)
Left lens for the Subacqua Mistral mask with a customizable corrective lens across the lower portion.
ICE CONVERSION KIT FOR TIFON REGULATOR
Kit cold/contaminated waters for Subaqua Tifon regulator. Converts a high-quality regulator, as is the typhoon, in one of supreme quality by adding the second membrane that makes the first stage completely sealed and valid for diving under the ice and even in contaminated water.
OCTOPUS PROTECTOR
Octopus holder adaptable to all kinds of mouthpieces. Allows carriying the octopus and locate it at all times.Prevent the sand or other contaminants incoming.
1 LP TO 3 LP ADAPTER
Adapter part which converts a low-pressure outlet of the first stage, in three low pressure outlets routed as T.
REGULATOR RELIEF VALVE
Safety relief valve for the first stage. It is placed in a low-pressure outlet LP and prevents malfunctions of the first stage by sudden pressure surges.
DIN200/INT YOKE CONVERSOR
Converting piece that screws on regulators with DIN 200 system, and converts into INT system. Very practical for trips where the taps of the bottles have INT system.
ELASTIC FIN STRAP
New straps made with an over-elastic rubber. Allows the flap fits perfectly without regulation. They serve many market fins and it is incorporated in the Sport Pro SUBACQUA fins. Available in three sizes: S, M/L and XL
DISCOVER CASE HANDLE
Discover case spare part: rigid handle. Its valid for booth simple and double lid models.
BC HOSE 74 CM
Low pressure hose to inflate your jacket. Standard valve connection to BPI and LP 3/8 thread for connection to the first stage.