Cookie preferences
LP BC CONECTION PRESSURE GAUGE
Low pressure gauge with connection to bc hose. It is used to check the outlet pressure of the first stage regulators. Must in any technical service.
DIN300/DIN300 EQUALIZER HOSE W/ VALVE
Transfer device 300 bar DIN connections on both ends and tap to control the transfer of gas between bottles. Approximate length of the hose: 1 m
Description:
Transfer device 300 bar DIN connections on both ends and tap to control the transfer of gas between bottles.
Approximate length of the hose: 1 m
Transfer device 300 bar DIN connections on both ends and tap to control the transfer of gas between bottles.
Approximate length of the hose: 1 m
SBACCS10015600
Specific References
Transfer device 300 bar DIN connections on both ends and tap to control the transfer of gas between bottles. Approximate length of the hose: 1 m
16 other products in the same category:
MINI PRESSURE GAUGE COMPLETE
Small size prressure gauge with high pressure hose. It occupies a very small space and is ideal for divers who want a minimum and light settings for diving trips. Dial diameter: 28 mm
COMPACT 2 CONSOLE
Compact console with two elements: pressure and depth gauge.Gauge up to 400 bar with red mark on the reserve area (past 50 bar). Depth up to 80 m with pointer of the maximum depth. High pressure hose 80 cm length compact.
BLACK HEAVY DUTY CONSOLE PRESS+DEPTH GAUGES
Diving console with analog instruments, pressure gauge with scale up to 400 bar and analog depth gauge with range up to 70 m.
WRIST PRESSURE GAUGE 80 M
Wrist analog depth gauge up to 80 m, with maximum depth marker. Very useful in apnea or spearfishing lowered to control depth.
COMPACT 3 CONSOLE
Control console compact and lightweight that contains the following elements: Depth and pressure gauge, and compass
WRIST COMPASS
A must for all diver orientation accessory. Bezel to memorize directions on surface and underwater. It contains brands for direct and reverse course.
DIN300/DIN30 EQUALIZER HOSE W/PRESSURE GAUGE
Transfer device to equalize pressures of bottles and / or transfer of gas to make mixtures. DIN 300 connections on both ends (also engages taps DIN 200), pressure gauge and purge control knob fitting for comfort. Approximate length of the hose: 1 m
BLACK HEAVY DUTY PRESSURE GAUGE 400 B
Gauge pressure up to 400 bar, with steel housing and protective rubber boot. Very resistant socket with rubber rings on either side.
INT/INT EQUALIZER HOSE
Gas transfer device with INT connection at both ends and purge system. Useful for balancing pressures between tanks and is ideal for filling small small tanks from larger tanks.
INT/INT EQUALIZER W/PRESSURE GAUGE
Transfer device to equalize pressures of bottles and / or transfer of gas to make mixtures. INT abutment connections at both ends, pressure gauge and purge control knob fitting for comfort. Approximate length of the hose 1 m.
COMPACT 2 DUAL CONSOLE PSI/BAR
subacqua compact 2 dual console psi bar: compact console subacqua with two elements: pressure and depth gauge. Dual scales (imperial/metric) in both gauges.
SURFACE PRESSURE GAUGE INT
Surface pressure gauge for reading tank pressure on land. INT connection system. Purge knob. Dial readable. Scale up to 400 bar.
COMPACT DUAL PRESSURE GAUGE PSI/BAR
subacqua compact dual pressure gauge: subacqua compact dual Pressure Gauge with small size and easy reading. Dual scale for psi and bar readings.
GREY WRIST COMPASS
subacqua wrist pro compass grey: New model of subacqua diving compass pro liquid filled wrist in rubber strap version (also available in Bungee version). Redesigned quick response even in readings with up to 30 degrees.